KIA Cerato spanner reset

Simple tutorial on how to reset the oil service maintenance reminder indicator (spanner) warning message light on Kia Cerato from the year 2013 on wards

• Close all doors. Gear to the park position.
• Turn the ignition on. Don’t start the engine.
• Continue to press the PAGE button until the SERVICE IN is displayed on the screen.

• While the SERVICE IN is displayed. Press and hold the RESET  button to reset the SERVICE to the next service interval schedule.

• Turn off the Ignition. Kia
  Cerato spanner  reset is complete.

To reset the service interval after an oil change, follow the procedures below;

1. Close all doors. Set gear to the park position.
2. Turn on the ignition. Don’t need to start the engine.
3. Press the PAGE button to navigate USER SETTINGS then press the OK button.
4. Then scroll down to SERVICE INTERVAL then press the OK button.
5. Configure the MILES and MONTHS.
6. After you configure the MILES and MONTH scroll up to select BACK.
7. The select YES to select SAVE on confirmation.
8. Turn off the ignition.

The service required (spanner) light is mainly used to remind drivers to change the oil and filter. When the light illuminates, you should take the car to be serviced at your convenience. If the vehicle doesn’t tell you what repair work needs to be done, refer to the owner’s manual of your car for specific information on your car’s model and what the light means.