The Nissan Navara has service light that can be reset after an oil change. Below is the procedure on how to do it depending on your vehicle model
- Turn the Ignition On.
- Press the PAGE button on the DIC located at the left side of the steering wheel. to Navigate SETTINGS then press ENTER.
- Select MAINTENANCE then press ENTER.
- Select the OIL CONTROL SYSTEM to reset the Oil.
- Choose the OIL FILTER to reset the Oil filter reminder.
- Turn Ignition OFF.
The Nissan Navara service light should now be reset.
For other Nissan models,
- Turn the Ignition ON.
- Then Press and HOLD the TRIP BUTTON until it displayed ( ——-km ) then release.
- Turn Ignition OFF. Service Reset is complete.
For older Nissan vehicles, follow these procedures
- Turn Ignition ON.
- Press and hold TRIP BUTTON. Hold for 5 seconds then release and HOLD again and it display 11000 then HOLD for 5 second and release until it displayed (OIL GOOD) then turn the ignition OFF.
Like every vehicle in the Nissan family, the Nissan Navara requires preventative maintenance at factory-recommended intervals to run properly. Many people have a difficult time staying on top of preventative maintenance for their vehicles, so Nissan put together a Nissan Hardbody maintenance schedule to help ensure your vehicle receives the upkeep it needs.