After each oil change and new filter, the service light indicator on your Volvo xc90 should disappear automatically. However, if it does not, it will need resetting for effective performance. Additionally, this indicator is included to alert you if there is a problem with the vehicle’s oil and is NOT to be ignored! If the warning is not addressed, this can lead to other unexpected costly engine issues. Below is how to reset it
- Put your key in the ignition and turn it to position one.
- Next, turn your trip computer to trip one.
- Press and hold the trip computer while turning your key to position two.
- The center arrow will flash red three times.
- On the third flash, you will let go and an alert will note that you just reset your service light.
For Models 2016-
- Turn the ignition switch to the ON position or position one, without starting the engine.
- Using the controls on the LEFT side of the steering wheel, press and HOLD the bottom button through the entire reset.
- Step on the brake and start the engine. Continue to hold the bottom button.
- Paying attention to the dash, wait about ten seconds. As soon as the warning light starts FLASHING, release the bottom button. Maintenance reminder reset will be shown in dashboard
- Switch the vehicle off then back on.
NOTE If you are unable to reset the service notification light in the Volvo XC90 on the first try, REPEAT the steps. If you are still unsuccessful, contact the dealership for assistance or consult your vehicle user’s manual.